Feature Comparison Table

Back to Main Page

VD26 Series This is a SINGLE DISPLAY on/off or proportional DIN controller range for use in SIMPLE APPLICATIONS WHERE THREE TERM CONTROL IS NOT REQUIRED
VT26 Series "FUZZY LOGIC" enhanced Dual Display "Auto-tuning" PID (Three term) DIN controller range for use WHERE ACCURACY IS IMPORTANT
VT30 Series "FUZZY LOGIC" enhanced Dual Display "Auto-tuning" PID (Three term) DIN controller range INCORPORATING PATTERN PROFILE CONTROL IN 16 STEPS RAMP AND SOAK c/w a host of features and event alarms

TECHNICAL COMPARRISON

  
VD26 Series
 
VT26 Series
VT30 Series
Size 48w x 48h x 100d
VD2600
 
VT4826
VT4830
96w x 96h x 80d
VD2604
 
VT9626
VT9630
72w x 72h x 80d
VD2601
 
VT7226
VT7230
96w x 48h x 80d
VD2603
 
 VT9426
 
48w x 96h x 80d
 
 
VT4926
VT4930
  
VD26 Series
 
VT26 Series
VT30 Series
Inputs

Thermocouple

J
 
K
 
B
 
R
 
S
 
T
 
E
 
N
 
C
 
RTD's
PT100 din
 

PT100 jis

 
Linear
 
  
VD Series
 
VT20 Series
VT30 Series
Remote Set Point (Option)
None
 
DC Linear
None
Output 1 Relay
 
Solid State Relay
 
Linear Current (0/4~20 mA)
 
Linear Voltage (0/1~5Vdc)
 

Output 2

As optional Extra

Relay
 
Solid State Relay
 
Linear Current (0/4~20 mA)
 
Linear Voltage (0/1~5Vdc)
 
  
VD Series
 
VT20 Series
VT30 Series
Alarms

1 x Std
Up to 3 Optional

  2 x Standard on all models 2 x Standard on all models
Control Action
ON/OFF
 
P
 
PD
 
Auto-Tune PID
 
 
Auto-Tune Fuzzy Enhanced PID
 
 
  
VD26 Series
 
VT26 Series
VT30 Series
Special Ramp Features One step ramp + soak (Soft Start)        
Pattern Programmable
2 x 8-segment ramp & soak profiles or 16 segment continuous
c/w event alarms etc
     
Retransmission Facilities Optional extra PV only DC Linear   PV or SV DC Linear PV or SV DC Linear
Modbus RS485 Optional extra
 
  
VD26 Series
 
VT26 Series
VT30 Series
Accuracy Thermocouple
± 1 °C
 
± 1 °C
± 1 °C
PT100 (RTD)
± 0.2 °C
 
± 0.2 °C
± 0.2 °C
Linear (4~20 etc)
± 3 µV
 
± 3 µV
± 3 µV
Power (Mains) All models come standard with 90~264 Vac 50/60hz or 90~264 Vdc
18~32 V AC or DC is available as an option

24 Vdc Auxiliary Power for use in powering 4~20 mA 4 wire transducers Available on all VD26, VT26 and VT30 models except the 48 x 48 size units.
               

Back to Top

Back to Main Page